User guide

Raven EDGE/GPRS for Cingular - User Guide, version 2.31 89
AT Commands: Logging
This group includes commands specific to the internal log.
*DBGCOMMLVL=n
*DBGIPLVL=n
*DBGPPPLVL=n
Logging
The commands displayed in Wireless Ace and the results of those commands depends on the
model of the modem.
FIGURE 1. Logging
Set the logging level for the host or module COM port.
n=0 : No logging
n=1 : Host COM
n=2 : Modu
le COM
Sets the logging level for the IP subsystem.
n=0 : No logging
n=1 : Log errors
(i.e. invalid/corrupt packets, etc.).
n=2 : Log the header of all received packets. Note that this can
quickly exhaust available space for the
event log.
n=3 : Log the header
of all received and sent packets. Note that this can quickly exhaust available space
for the event log.
Sets the logging level for the PPP stack.
Enables logging at different levels of detail.
n=0 : No logging
n=1 : Log client events
(default)
n=2 : Log server events
n=3 : Log client and Server
events