User guide

Raven EDGE/GPRS for Cingular - User Guide, version 2.31 86
AT Commands: Other
*IPPING=n
*IPPINGADDR=[d.d.d.d][name]
*MSCIUPDADDR=name[/port]
*MSCIUPDPERIOD=n
*NETWDOG=n
*SNMPCOMMUNITY=n
*SNMPPORT=n
Set the period to ping (if no valid packets have bee
n
received) a specified address (*IPPIN-
GADDR) to keep the modem alive (online).
n=15-255 minutes
n=0 : Disable pinging (defau
lt)
15 minutes is the minimum interval which can be set for Keepalive.
See also *MINXMIT which can override this value.
Set the IP address or valid internet domain name for the Raven to ping to keep itself alive
(onli
ne). *IPPING must to be set to a value other than 0 to enable pinging.
d.d.d.d=IP address
name= domain name
Mod
em Status Update Address - where Name/Port is the domain name and port of the
machine where the modem status updates will be s
ent. The Raven's status parameters are sent
in an XML format.
name=dom
ain name
port=port
Mod
em Status Update Period - where n defines the update period in seconds.
n=1-255 seconds
n=0 : Disabled.
Network connection watchdog: The number of minutes to wait for a network connection. If no
connection is established within the set number of minutes, the Raven resets.
n=minutes Default = 20 min.
n=0 : Disabled.
The SNMP Community String acts like a password to limit access to the modem’s SNMP data.
n=a string of no more than 20 characters (default = public).
This controls which port the SNMP Agent listens on.
n=1-65535
n=0 : SNMP is disa
bled.