User guide

Raven EDGE/GPRS for Cingular - User Guide, version 2.31 83
AT Commands: SMTP (including SMS)
This group includes commands specific to messaging.
FIGURE 1. Common : SMTP
SMTP (including SMS)
SMTP (Simple Mail Transfer Protocol) is the de facto standard for email transmission across the
Internet. The
Raven can send messages using SMTP if it has been configured to use a mail server.
SMS (Short Message Service) is another way to send
messages via Cingular’s cellular network.
Caution: Your account with Cingular may not support message sending with SMS.
For most SMS commands (those not proceeded by *), you will need to have the
modem in PassThru mode.
*SMTPADDR=[d.d.d.d][name]
[nom]
Specify the IP address or Fully Qu
alified Domain Name (FQDN) of the SMTP server to use.
d.d.d.d=IP Address
name=domain name
Maximum: 40
characters.
*SMTPFROM=email
Sets the email address from
which the SMTP message is being sent.
email= email address
Maximum: 30
characters.
*SMTPPW=password
Sets the password to use when authenticating the email account (*SMTPFROM) with the server (*SMT-
PADDR).
pass= password
Note: Not required to use SMTP settings but may be required by Cingular.