User guide

Raven EDGE/GPRS for Cingular - User Guide, version 2.31 95

AT Commands: EDGE/HSDPA

FIGURE 1. EDGE/HSDPA

*NETAPN=apn

+CGQMIN

+CGQREQ

+COPS=mod

e,[format][,oper]

EDGE/HSDPA

This group includes commands specific to EDGE and GPRS.

The commands displayed in Wireless Ace and the result

s of those commands depends on the

model of the modem.

Easy entry of the APN.

apn=access

f left blank, the modem will attempt to use the default subscriber value as defined

by the

account.

Minimum Acceptable Quality of Service Profile.

Chan

ge should be at carrier's request. Normally not required to be changed.

Set Quality of Service Profile.

Change should be at carrier's request. Normally not required to be changed.

Manually specify an operator.

Refer also to *NETOP.

mode=0 : Automatic - any affiliated carrier [default].

mode=1 : Manual

- use only the operator <oper> specified.

mode=4 : Manual/Automatic - if manual selection fails, goes to automatic mode.

form

at=0 : Alphanumeric ("name") (G3210 must use this format).

form

at=2 : Numeric

oper=”name”