User guide

Raven EDGE/GPRS for Cingular - User Guide, version 2.31 5
CHAPTER 2 Activation of the Raven
To install the SIM, you will only need a small phillips head screw driver.
a. Unplug the Raven’s power and all cables.
b. Using a small phillips head screw driver, remove the screws
on the back of the Raven.
c. Slide the casing off of the Raven and set
it aside.
b. Slide the tray out of the slot.
1.
Opening the Case
FIGURE 1. Raven back
2.
Ejecting the SIM tray
a. Using the tip of a PDA stylus, an unbent paperclip, or other slim blunt item press the yellow
button of the SIM tray. On the Raven, the button is between two boards.
FIGURE 2. Tray button: Raven