Instruction manual

Raven X-HSPA Sierra Wireless Cellular Modem
2
1 General Description
This manual provides information for interfacing the Sierra Wireless Raven X
cellular modem to Campbell Scientific dataloggers. Please note that this
manual we will focus on the use of the RAVEN X-HSPA on the Bell, Telus
and Rogers networks.
The Sierra Wireless AirLink Raven X Cellular Modem is a high-speed interface
optimized for use on 3G architecture. The modem is accessed through the
Internet using TCP/IP communications protocol using a Dynamic or Static IP
address.
The Raven X offers two-way data exchange with a base station PC via the
High-Speed Uplink Packet Access (HSUPA) network, with fallback to
HSDPA, UMTS, EDGE, GPRS, or GSM. The Raven X modem is for use on
the Bell, Telus, or Rogers networks.
The AirLink Embedded Operating System (ALEOS) is the embedded core
technology of the Sierra Wireless AirLink products simplifies installation,
operation and maintenance of any solution, and provides an always-on, always-
aware intelligent connection for mission-critical applications.
2 Establish Cellular Service
2.1 Raven X Cellular Coverage/Service Requirements
What you need:
Determine coverage at the datalogger site for your chosen service provider.
Coverage maps are available on each provider’s website. It is also possible to
search for “Canadian cellular tower maps” for information on tower locations
and possible coverage.
A public Dynamic IP or Static IP account established with Service Provider on
their HSPA network. The IP and account types will vary depending on the
Service Provider.
It is recommended to discuss the account types available and
their requirements with your intended Service Provider before
purchasing the RAVEN X-HSPA modem.
NOTE