Instruction manual

Raven X-HSPA Sierra Wireless Cellular Modem

Rogers Dynamic IP Example:

Select the “Misc.” tab from the list on the left hand side. Enter the Phone Number.

Select the “Dynamic IP” tab from the list on the left hand side. Enter the Modem Name.

All Examples:

Once the necessary fields have been entered, click the “Write” button to commit the

changes to the modems memory. At this point the modem is fully programmed to

communicate to a Campbell Scientific datalogger using a wireless IP connection.

Turn off the power to the modem and disconnect from the PC. Turn the power back on

and the modem will register itself on the network within 2 minutes. To confirm this, make