Instruction manual

Raven X-HSPA Sierra Wireless Cellular Modem
13
Connect the Raven X-HSPA to a com port on the PC with a direct RS-232 serial
cable. Also connect the antenna, and 12V power.
Run AceManager to get the following screen:
Click the Connect icon in the Configuration Panel to open the connection options
dialogue box. Select PPP, and the COM port the modem is connected to. Do not
change the Password (the default password is 12345). Click OK to continue.
If the modem has been configured for “PPP” (see Appendix A), then you may have
to check the “Use SOS Mode” box.
Click the Load icon in the Configuration Panel. When prompted for a template
file name, select the appropriate .xml file (downloaded from the CSC website).
Enter the required configuration information for the Service Provider.