Specifications

RavenXTG Sierra Wireless Cellular Modem

The Device Port gets changed from the default 12345 to 3001 when the

template file is loaded into the modem (Section 5). The Device Port number

gets entered with the IP address in LoggerNet (Section 6).

Connect to the modem with AceManager (Section 5.3). Select the “Serial”

Group, and make sure the “AT Verbose Mode” is set to “Numeric” for use

with the CR10(X), CR510, and CR23X dataloggers, or “Verbose” for other

dataloggers (e.g. CR1000).

The “Raven GPRS/EDGE Template 9600” template file sets the baud rate to

9600, which is the maximum baud rate for the CR10X and older dataloggers.

For newer dataloggers, the baud rate can be changed to the highest baud rate

supported by the datalogger (e.g. 115200 baud for the CR1000).