Specifications

RavenXTG Sierra Wireless Cellular Modem
IP changes (i.e. if the modem is reset or is assigned a different IP). The
value can be set from 0 - 255 minutes.
Restrictions for Modem Name
• Must begin with a letter or number
• Can include a hyphen (-)
• Cannot contain spaces
• Must be no longer than 20 characters total
Click the Write icon to save the changes
.
Click the Reset icon to restart the modem.
Click the Disconnect icon to terminate communications with the modem.
5.3 RavenXTG Indicator Lights
When your Raven XT is connected to power and an antenna, there is a specific
pattern to the lights to indicate its operation mode.
• Network—Indicates a successful connection to the cellular network with
an IP address given and a channel acquired.
• Signal—Light shows the strength of the signal and may be nearly solid
(strong signal) or flashing (weaker signal). A slow flash indicates a very
weak signal.
• Activity—Lights will flash as data is transferred to and from the PinPoint
modem on the remote network.
• Power—Indicates the power adapter is connected and there is power
getting to the Raven XT.
• The Reset button (on the left side of the Raven XT) has two functions. If
it is quickly depressed and released, the modem will simply power cycle
the internal hardware. If, however, the reset is depressed and held for
several seconds (count 10 slowly, and wait for the power light to go off
after the light pattern stops), the ALEOS configuration settings will return
to the factory defaults.
14