Specifications

RavenXTG Sierra Wireless Cellular Modem
Click on EDGE/HSDPA Group to get the following screen:
For a data account with the I2GOLD APN, enter the APN as shown in the
following screen. The example is for an APN = “I2GOLD”.
After the template file has been loaded, and the APN entered, click the Write
icon to save the changes in the modem
.
Account options prior to the “I2Gold” included a data account with “Feature
Code G821”. An AT&T account with Feature Code G821 is configured for an
Access Point Name (APN) = “internet”. Enter “internet” in the New Value
field for “*NETAPN” and “1,IP,internet” in the New Value field for
+CGDCONT.
Click the Reset icon to restart the modem. The other ways to reset the modem
are by pressing the reset button on the front of the modem or removing the
power from the modem.
Click the Disconnect icon to terminate communications with the modem.
Unless you click the Write command, changes made in the New
Value field will not be sent to the modem. For some changes
(e.g., baud rate) you must also Reset the modem before the
changes will take effect.
NOTE
5.2 Dynamic IP Address
Accounts with the I2GOLD APN are provided with a Static IP address,
and do not require the settings described in Section 5.2. Accounts without
the I2GOLD APN may be provided with a Dynamic IP address, which will
require the IP Manager settings described below.
Dynamic IP addresses are granted only when a modem or other device is
connected and can change each time the modem or device reconnects to the
network.
12