Specifications

RavenXTG Sierra Wireless Cellular Modem

Run AceManager to get the following screen:

Click the Connect icon in the Configuration Panel to open the connection

options dialogue box. Select PPP, and the COM port the modem is connected

to. Do not change the Password (the default password is 12345). Click OK to

continue.

If the modem has been configured for “PPP” (see appendix B), then you may

have to check the “Use SOS Mode” box.

Click the Load icon in the Configuration panel. When prompted for a template

file name, select “ravenGPRS/EDGE_115200.xml” for dataloggers that

support 115200 baud (e.g. CR1000), or “ravenGPRS/EDGE_9600.xml” for

dataloggers that support a maximum baud rate of 9600 (e.g. CR10X). The

template file configures the modem to be compatible with CSI dataloggers.

Template files are available from Campbell Scientific’s Website: