User guide

SAA CR Logger Integration Guide
May 2012 21
To configure the task, click on the ‘Configure Task’ button. Once the configure screen is open (Figure
13.2), check ‘Execute File’ and browse to C:\Measurand Inc\SAA3D\SAACR_raw2data.exe (or the
appropriate folder containing this file). Under ‘Command Line Options’ you must specify the
pref_project.txt file that was generated when the first manual conversion was completed. It should be
located in the same directory as the raw data. This entry must be surrounded by double quotation
marks (“ ”) since there is a space in the C:\Measurand Inc\ path. This file contains settings necessary for
SAACR_raw2data to complete subsequent conversions. Under ‘Start In’, enter C:\Measurand
Inc\SAA3D\. Select ‘Run Minimized’ if you don’t want to see the application running when it gets called.
Hit ‘Apply’. The Task Master will now automatically convert raw data that is scheduled to be collected
using the LoggerNet ‘Setup’ utility.
Figure 13.2: Configuring task options in Task Master.
Note: The path name to the pref_project.txt file must be surrounded by double quotation marks
since there is a space in C:\Measurand Inc\
Verify that the ‘Pause All Tasks’ check box under the Status tab of the Task Master utility is unchecked,
Figure 13.3. The SAACR_raw2data utility will now run upon successful completion of a scheduled data
download. A progress bar will now appear after a scheduled data download indicating that the
SAACR_raw2data utility is running. If any of the files required by SAACR_raw2data are open while the
program is being executed an error message will be generated. Data can be viewed at any point by
running the SAA3D and viewing the most recent data which has already been automatically converted.