User guide

SAA CR Logger Integration Guide
May 2012 16
Figure 9.2: Collecting data using the LoggerNet ‘Connect’ utility.
10. Automated Data Collection
Once the manual data collection process has been tested, the data collection process can be automated
by specifying the desired data collection interval in the ‘Schedule’ tab of the LoggerNet ‘Setup’ utility
(Figure 10.1). Check the ‘Scheduled Collection Enabled’ checkbox.
As long as the destination CR1000 is connected (wired or wirelessly), data will be downloaded to the
Output File Directory. The Campbell Scientific Raven X manual provides details of configuring a wireless
connection with the CR1000. The Campbell Scientific LoggerNet manual provides details of configuring a
connection with the CR1000 using a land line. A trial test should always be conducted before beginning a
project to ensure that the system is performing as expected.