Instruction manual

Raven XT-Rogers Sierra Wireless Cellular Modem

In some cases where signal strength is low, you may have to decrease the

packet size of the CR1000. A recommended value of 400 bytes should be

sufficient.

7. Troubleshooting

If LoggerNet/PC400W software is unable to establish a connection with the

modem:

7.1 Check the Modem Configuration

a. Check the GPRS cellular account information, and verify there is GPRS

coverage at the site. Dynamic IP accounts require a Dynamic Domain

Name Server (DDNS) (Section 5).

b. The modem has to be configured using AceManager as described in

Section 5.

c. Modem settings have to be changed, and the APN entered, using

AceManager (Section 5). After the Raven XT template file has been

loaded, you can verify settings in the Status, Misc, Serial, and

GPRS/EDGE groups have been configured as shown below.