Instruction manual

Raven XT-Rogers Sierra Wireless Cellular Modem
will then be the address for the Raven’s configured name. Once the Raven’s IP
has been updated in IP Manager, it can be contacted via name.
AceManager is used to configure the Dynamic IP settings in your Raven so
that it will use IP Manager as described below.
Connect with modem using AceManager. Select the Dynamic IP group to
configure your modem to use IP Manager.
To configure your Sierra Wireless modem to be addressed by name, the
modem needs to have four elements configured.
Enter names in the New Value fields for MODEMNAME, DOMAIN,
IPMANAGER1, IPMANAGER2, and IPMGRUPDATE1.
1. Modem name: A unique name for the modem (the 10-digit MSISDN
number is recommended).
2. Domain: The domain name to be used by the modem (eairlink.com).
3. IP Manager IP Address: The IP or domain name of the dynamic DNS
server which is running IP Manager.
IPMANAGER1: edns2.eairlink.com
IPMANAGER2: edns2.eairlink.com
4. IP Manager update interval: How often you want the address sent to IP
Manager. If this is set to zero, the modem will only send an update if the
IP changes (i.e. if the modem is reset or is assigned a different IP). The
value can be set from 0 - 255 minutes, and should be set to a value
appropriate for your application.
Restrictions for Modem Name
• Must begin with a letter or number
12