Instruction manual

Raven XT-Rogers Sierra Wireless Cellular Modem
Click on EDGE/HSDPA Group to get the following screen:
For a data account with the VPN.COM APN, enter the APN as shown in the
following screen. The example is for an APN = “I2GOLD.COM”.
After the template file has been loaded, and the APN entered, click the Write
icon to save the changes in the modem
.
Click the Reset icon to restart the modem. The other ways to reset the modem
are by pressing the reset button on the front of the modem or removing the
power from the modem.
Click the Disconnect icon to terminate communications with the modem.
Unless you click the Write command, changes made in the New
Value field will not be sent to the modem. For some changes
(e.g., baud rate) you must also Reset the modem before the
changes will take effect.
NOTE
5.2 Dynamic IP Address
Dynamic IP addresses are granted only when a modem or other device is
connected and can change each time the modem or device reconnects to the
network.
IP Manager is a free service provided by Sierra Wireless for the Raven to
translate a dynamic IP address into a fully qualified domain name so it can be
contacted directly on the Internet. IP Manager translates a dynamic IP address
to a fully qualified domain name so you can contact your Raven by name as if
it had a static IP.
If the Raven is configured for Dynamic IP, when the Raven first connects to
the Internet, it sends an IP change notification to IP Manager. IP Manger will
acknowledge the change and update the DNS record. The changed IP address
11