Operator`s manual

Ilk
L\Setupi
Proqrarns I, D ata A E rase /
"I
Status Advanced...!
I:7# Connect
update Status I
.g?,SMS
III la
File
Options
Data
T ools Help
CS tvil .4,11=F1
!E; tvi 1 92/SM 71 F't Card IM SM4M/SM16M:
Stet us 8 o x
COM Port Setup Module Pointers
Port
Free :;pace
Storage Ref. Pointer
6- COM1
Baud Pate Displa,,. Pointer
COM2 DumpPointer
9500
COM3
Module Values
COM4
Good FLASH blocks
Error Count
Prograrns
I Via
F., ox
Target Address
Auto
r: 1
C 4
2
5
r
r
r
Switch Settings
53
Manual
Double click this icon to activate PC208W. The following toolbar appears:
Double click the Stg Module icon. In the window that appears, first click the “SM4M/SM16M” tab at the top right
most corner of the screen, and subsequently the “Setup” tab at the bottom-left. The following window shows up.
In this setup window, select the appropriate COM port. A default Baud Rate of 19200 is OK or otherwise change it to
lower baud rate if necessary. Click the “Connect” button to connect the Storage Module to the PC. If communication
is successfully established, the below screen appears.
Annexes