Product manual

Appendix D. NL200 Driver Installation Instructions
D.3 Installing on Windows 7
1. Before you plug the NL200 into a computer USB port, you must first run
the install utility on the NL200 install disc. This will ensure that the driver
files are copied where the operating system can find them.
2. Connect a USB cable to the NL200 USB port and one of your computer's
USB ports.
3. The operating system should now install the driver and will report that it is
ready for use once it has been installed.
D.4 Oops! What if you plug the NL200 into your
computer before installing the drivers?
1. Run the install utility on the NL200 install disc. This will ensure that the
driver files are copied where the operating system can find them.
2. Connect a USB cable to the NL200 USB port and one of your computer's
USB ports.
3. Open the Device Manager from the Windows’ Control Panel.
4. Find the NL200 under Other devices.
5. Right click on the NL200 and select “Scan for hardware changes”.
6. Windows should then install the NL200 properly.
D-4