Product manual

Appendix D. NL200 Driver Installation
Instructions
If no NL200 has been previously plugged into your computer, it will be
necessary to install the drivers for the NL200 to enable communication with
this device. The driver is available on the driver disc that was shipped with the
NL200. If that disc is no longer available, you can also download the drivers
from Campbell Scientific's website.
D.1 Installing on Windows XP
1. Before you plug the NL200 into a computer USB port, you must first run
the install utility on the NL200 install disc. This will ensure that the driver
files are copied where the operating system can find them.
2. Connect a USB cable to the NL200 USB port and one of your computer's
USB ports. After some delay, your computer should display a dialog
similar to that shown below:
3. Select Install the software automatically and click Next.
D-1