Product manual

Appendix C. NL200 Settings
PakBus/TCP Client Address (1-4)
This setting specifies the IP address of an outgoing PakBus/TCP client
connection that the NL200 should maintain. If the connection fails, the NL200
will retry until the connection succeeds. No entry or a setting of 0.0.0.0
specifies that no client connection will be made.
PakBus/TCP Client Port (1-4)
This setting specifies the TCP port of the outgoing PakBus/TCP client
connection. Typically it is not necessary to change this entry from its default.
(range 1..65535)
Routes (read only)
This setting lists the routes that are known to the NL200. Each route known to
the NL200 will be represented by the following four components separated by
commas and enclosed in parentheses. The description of each component
follows:
Port Number
Specifies a numeric code for the port that the router will use. Will
correspond with one of the following:
0 CS I/O
1 RS-232
100 PakBus/TCP Connection — If the value of the port number is
100 or greater, the connection is made through PakBus/TCP.
Via Neighbor Address
Specifies the address of the neighbor/router that will be used to send
messages for this route. If the route is for a neighbor, this value will be the
same as the address.
PakBus Address
Specifies the address that the route will reach.
Response Time
Specifies the amount of time (in milliseconds) that will be allowed for the
route.
C-7