Product manual

NL200 Network Link Interface

Power

DC Barrel Connector (not CS I/O or USB)

7-20 VDC

50 mA active, 2 mA standby @ 13 VDC

Standby power is when the IPNetPower instruction has been

used to turn off power to the Ethernet. See the CRBasic help for

an example of using the IPNetPower instruction. Note that the

IPNetPower instruction is only applicable in Bridge Mode.

NOTE

Operating Temperature

Standard -25° to +50°C

Configuration

Device Configuration Utility over USB (Micro-B) or Ethernet

Telnet console over Ethernet

CS I/O Port

SDC 7, 8, 10, 11 (does not support ME)

9600 to 115.2 kbps

RS-232 Port

DTE

1200 bps to 115.2 kbps

Ethernet

10/100 Mbps, IEEE 802.3, Auto-MDIX

IPv4, TCP, DHCP, Ping, Telnet, TLS, PakBus

Miscellaneous

Supports 20 simultaneous TCP Connections

Up to 10 of the 20 TCP connections can be used for TLS

PakBus Router supports 50 routes

Compliance

RoHS Compliant

Magnetic Isolation, ESD and Surge tested

The NL200 is encased in metal and meets requirements for a Class B

device under European standards:

APPLICATION OF COUNCIL DIRECTIVE(S)

2004/108/EC

STANDARD(S) TO WHICH CONFORMITY IS DECLARED:

EN61326-1;2006