Instruction manual

SECTION 5. STG MODULE: SMS - STORAGE MODULE SOFTWARE
PC208W, Version 3.0, Instruction Manual 5-7
you are leaving the module unattended to
collect data in cold weather.
CAUTION: Failure to check the battery can
lead to data loss in the above conditions.
5.4 PROGRAMS
Clicking the PROGRAMS tab brings up the
PROGRAM CONTROL OPTION screen. The
screen is very similar for both the storage
devices and the PC Card. It is essentially an
interface for extracting programs, saving
programs or clearing programs from the storage
device.
The screen in Figure 5-5 shows the program
selection checkboxes and the program
manipulation buttons. Datalogger programs can
be stored in a card or module for subsequent
downloading into a datalogger. The programs
are stored in the same memory space available
for data storage and are stored in up to eight
memory locations. With the correct version of
datalogger software, the program in location 8
can be automatically loaded, compiled and run
in a datalogger on power-up of the datalogger.
(See appropriate Storage Module Instruction
Manual for more details.)
There are also three buttons – Clear, Store
and Read.
FIGURE 5-5. PROGRAMS Screen