Instruction manual

SECTION 3. REPORT: SPLIT
PC208W, Version 3.0, Instruction Manual 3-17
starting time even if a complete array is missing
from the input data. When elements are
missing, the Time Series calculations are based
on the actual number of elements found.
Semicolons are used in Time Series functions
to separate the elements or expressions from
the count which determines the interval.
SmplMax and SmplMin require two elements
separated by a semicolon. The first is checked
for a maximum or minimum, while the second is
sampled on the maximum or minimum.
The following set of weather data from Mt.
Logan Peak in Cache Valley, Utah gives a total
of seven elements each hour. This Field
Delineated output, with title and column
headers, was generated by SPLIT. These data
are used in the following examples of Time
Series functions.
Mt. Logan Weather Data
Day Time Air RH Mean Mean Std
temp Wind Wind Dev
deg Speed Vec of
F mph Dir Dir
178 100 58.56 17.42 5.855 338.3 6.562
178 200 57.48 17.65 8.27 344.8 7.51
178 300 56.85 17.76 7.75 330.8 5.065
178 400 56.55 18.89 7.6 319.7 10.93
178 500 56.57 19.6 10.41 307.3 4.23
178 600 55.33 23.32 8.99 317.7 6.258
178 700 55.95 24.79 9.52 322.3 4.609
178 800 58.12 23.98 6.588 315.6 9.43
178 900 59.79 23.46 5.458 312 15.32
178 1000 61.09 24.12 4.622 299.3 18.3
178 1100 61.34 25.03 5.926 303 17.26
178 1200 60.61 27.46 6.815 309.7 18.71
178 1300 61.01 25.44 8.35 310.2 18.37
178 1400 60.93 25.48 10.92 317.5 12.68
178 1500 62.3 23.79 8.43 310.6 19.21
178 1600 63.75 24.31 8.88 321.4 15.22
178 1700 66.15 22.45 7.97 341 17.77
178 1800 67.33 23.06 6.758 344.1 20.74
178 1900 66.59 24.75 7.08 341.8 16.09
178 2000 64.52 26.03 8.76 337.2 14.91
178 2100 59.84 27.45 11.81 305.4 12.36
178 2200 56.19 35.46 15.62 316.7 19.01
178 2300 55.48 38.8 17.12 338.7 11.41
179 0 55.22 37.13 11.86 351.6 8.22