Instruction manual

SECTION 3. REPORT: SPLIT
PC208W, Version 3.0, Instruction Manual 3-5
FIGURE 3.2-8. SPLIT Run Showing Hourly Data
3.3 SPLIT PARAMETER FILE ENTRIES
3.3.1 INPUT FILES
The name of the Input File is entered in the
space to the right of the Browse button. The
default directory is defined by the properties of
the shortcut that started PC208W. If the input
file is not in the default directory, use the
Browse button to find the input file.
Input Files must be formatted in Comma
Separated ASCII, Final Storage (Binary)
Format, Field Formatted ASCII (SPLIT default
output format), Printable ASCII, or Raw A/D
data (refer to special Burst Mode Instruction in
Campbell Scientific datalogger manual).
Table 3.3-1 provides an example of Printable
ASCII, Comma Separated, and Field Formatted
input file types. The data in the various formats
are identical. Each line of data represents an
"Output Array", starting with an Output Array ID
(in this case 115). Each data point in the
Output Array is referred to as an "element".
The element number is given in the Printable
ASCII format, and implied in the other formats.
Data presented in Table 3.3-1 is used for
example purposes in the following sections.