Instruction manual

SECTION 3. REPORT: SPLIT
3-4 PC208W, Version 3.0, Instruction Manual
FIGURE 3.2-6. Pasting Labels Into SPLIT
FIGURE 3.2-7. Edited Headings
Maximum column heading width is one less
than the number entered in the column width
field. Any FSL labels which are too long for
SPLIT column headings will be shown in red.
They should be edited before running SPLIT.
To edit one of the labels, press the <Enter> key
or use a mouse to copy, cut, and paste. A
Report Heading can also be entered (Figure
3.3-7) using the same editing technique.
Now we are ready to run SPLIT. Select RUN |
GO and the hourly data will be split out and
stored in hourly.prn. The results are displayed
on the screen as shown in Figure 3.2-8.
Close the Run window. If you wish to save this
parameter file for future reports, choose FILE |
SAVE. The file will be saved with a .PAR
extension.