Instruction manual

SECTION 3. REPORT: SPLIT
3-2 PC208W, Version 3.0, Instruction Manual
FIGURE 3.2-3. Input File Template
Start SPLIT from the PC208W
toolbar by clicking on the Report icon. Figure
3.2-3 shows the blank SPLIT template.
Information entered into this template can be
saved as a parameter file (*.PAR) and reused
for other data.
On the INPUT FILE tab we only need to specify
the input filename, copy condition, and the data
to select. SPLIT allows specific start and stop
conditions to be specified but if they are left
blank, the entire file will be read.
The name of the Input Data File can be typed in
or the Browse button can be used to select
from available files. In this example:
C:\PC208W\WS1.dat is selected as the input
data file.
Selecting the data to copy is simplified by the
use of the WS1.fsl file. From the toolbar menu,
click on LABELS | USE FINAL STORAGE
LABELS. From the Data File Labels pop-up,
Select File is used to find WS1.fsl. When one
of the Output Arrays is highlighted, the Field
Names of the data in that array are displayed
(Figure 3.2-4).
FIGURE 3.2-4. DATA FILE LABELS Screen