Instruction manual

SECTION 1. SETTING UP THE NETWORK AND COMMUNICATING WITH THE DATALOGGER
PC208W, Version 3.0, Instruction Manual 1-3
connected as a child component or on the
same level. If the device you are moving to
a new location has child components, these
will be moved along with their parent
device.
• If you delete a component with child
components attached, the child
components also will be deleted.
• If you inadvertently delete a
communications link, it can be refreshed by
choosing Cancel Edits (as long as you have
not chosen Save Edits since the deletion).
1.2.4 EXAMPLE DEVICE MAPS
Refer to the examples below for help in setting
up your own Device Map.
Step-by-step examples are provided in the
PC208W help file. These can be accessed
from the content page, by a right click on the
device map in the Setup screen, or by
searching for Cue Cards in the help file index.
Direct Connect via an SC32A or RAD Short
Haul Modem Pairs to a CR10X:
NOTE: Older short haul modems (SC95)
are set up as generic modems with the
datalogger attached. Refer to Appendix B
for more information.
RF (RadioTelemetry) Connection to Three
CR10Xs:
MD9 (Coax Multi-drop) Connection to Three
CR10Xs: