Instruction manual

3
Ethernet: 10/100 BaseT, Auto – MDI/X, IEEE
802.3
SIM Card: 1.8 / 3.0V
PPP Characteristics: Dial on Demand, Idle Time
Network Protocols: TCP, UDP, TCP/IP, TFTP, ARP, ICMP,
DHCP, HTTP, HTTPS
*
, SSH
*
, SNMP,
FTP, DNS, Serial over IP, QoS
Management: Local Serial Console, Telnet, WebUI,
SNMP, FTP & Wireless Upgrade,
RADIUS authentication, IPsec VLAN
Diagnostics: Temperature, RSSI, remote diagnostics
Input Voltage: 7 to 30 Vdc
Operating Temperature: -40 to +85°C
Humidty: 5% to 95% non-condensing
Dimensions: 56mm x 97mm x 37mm
Weight: Approximately 245 grams
Antenna(s): Main TX/RX: SMA Female
Connectors: Data: DE-9 Female
Ethernet: RJ-45
5. Installation
What you need:
x Determine coverage at the site for your chosen service provider. Coverage
maps are available on each provider’s website. It is also possible to search
for “Canadian cellular tower maps” for information on tower locations and
possible coverage.
x A Public IP (Dynamic or Static) subscription on the HSPA network.
Service providers tend to have different names or descriptions for these
service add-ons. Below are key terms for each service provider:
o Bell
Public Dynamic IP access
Public Static IP access
o Telus
Dynamic Connect (Public)
Static Connect (Public)