Instruction manual

30
Under the Firewall tab, select Port Forwarding. Rules are required to map the
ports required to ensure HTTP, FTP and LoggerNet communications to the
datalogger at the assigned IP address.
1. In order to setup access to the datalogger HTTP server (for access to the
datalogger’s webpage), the following rule configuration needs to be added and
applied:
x Enter a Rule Name for HTTP
x Internal Server IP = 192.168.0.99 (this is the IP address assigned to
the datalogger)
x Internal Port = 80
x Protocol = TCP
x External Port = 8000
x Click ‘Add’ button, then ‘Apply’
The external port number 8000 is an example. Use any
(unrestricted) port number other than 80, 443, or 23, as they are
required for modem access and configuration. Be sure to include
the external HTTP port number in any communications attempting
to reach the datalogger webpage (ex.: 173.182.77.117:8000).
2. In order to setup access to the datalogger’s FTP server (for remote file
access), the following rule configuration needs to be added and applied:
x Enter a Rule Name for FTP
x Internal Server IP = 192.168.0.99 (this is the IP address assigned to
the datalogger)
x Internal Port = 21
x Protocol = TCP
x External Port = 2100
x Click ‘Add’, then ‘Apply’
The external port number 2100 is used as an example. Use any (unrestricted)
port number other than 80, 443, or 23, as they are required for modem access
and configuration. Be sure to include the external FTP port number in any
communications attempting to reach the datalogger FTP site (ex.:
ftp://173.182.77.117:2100).
Note
NOTE