Instruction manual

7
5.3.4 Network Provisioning
The network provision configurations are specific to the service provider. The
remaining configuration steps are the same for Bell, Telus, or Rogers users.
Details related to Dynamic and Static IP configurations are listed below.
To provision the modem on the service provider network the following
information will need to be entered into the “Config” tab under “Carrier”.
Please note that the guidelines below may not apply in all cases. If you
encounter issues provisioning using the recommendations below, please
contact your service provider for the APN, User Name, and password
requirements for your specific SIM card. Please contact your service provider
for details related to the required APN for dynamic IP accounts.
It is possible to use a Public Static IP with the modem. For static IP accounts,
enter the static IP in “Static IP Addr”. Please contact your service provider for
details related to the required APN for static IP accounts.
5.3.4.1 Bell
5.3.4.1.1 Static IP
x Access Point Name (APN): For example, static.bell.ca
Static APNs differ across Canada; ask Bell service provider for
appropriate APN
NOTE