Instruction manual

Appendix A. Configuration Menus
A.4 Time/Date Menu
This submenu contains a list of settings to configure the clock system of the
HydroSense II. Using the buttons, highlight one of the options and
press . Alternatively, press to quit this menu.
A.5 Time Set
The HydroSense II clock is normally set automatically at GPS sync. This
menu is used to set the HydroSense II clock if GPS is not used. The
buttons can be used to move between the different parts of time and date, while
the buttons adjust each individual part of the time and date. At the
top of the screen, the date format is displayed for reference. To save the
adjusted time to the clock, press . To exit without saving, press .
A.6 Date Format
This menu sets the format in which dates are displayed throughout the system.
Use the buttons to choose the desired format, and press . To quit
the menu without saving, press .
A-2