Instruction manual
Table Of Contents
- Revision and Copyright Information
- Limited Warranty
- Assistance
- Precautions
- Table of Contents
- 1. Introduction
- 2. Cautionary Statements
- 3. Initial Inspection
- 4. Quickstart
- 5. Overview
- 6. Specifications
- 7. Installation
- 8. Sensor Maintenance
- 9. Troubleshooting
- 10. References
- Appendix A. Importing Short Cut Code
- Appendix B. Example Programs
- Appendix C. Interfacing with HMP155A RS-485 Output
- Campbell Scientific Companies
Appendix C. Interfacing with HMP155A RS-485 Output
Use the Device Manager in Windows to determine which COM port the
USB/RS-485 cable was assigned:
Configure Windows HyperTerminal for the appropriate COM port (for
example, COM8 in the example above) for the default HMP155A RS-485
settings of 4800 baud, 7, E, 1.
C-5