User manual

Appendix B. Changing the HC2S3 Settings
B-2
Prior to using the AC3001 cable, the ROTRONIC USB driver
must be installed on the PC. Both the driver and the installation
instructions (document E-M-HW4v3-Main) are located on the
HW4 CD.
B.3 Changing the Temperature Range
Install the HW4 software and drivers for the AC3001 USB cable on the PC.
Connect the HC2S3 probe to the AC3001 cable, making sure the connectors are
properly aligned before tightening the knurled ring. Plug the AC3001 cable into
a USB port on the computer.
From the main screen, click on the “devices and groups”, search for “master
devices”, USB masters.
HW4 should find the probe, and show the current values:
IMPORTANT