User manual

HC2S3 Temperature and Relative Humidity Probe
2
4. Quickstart
4.1 Step 1 — Mount the Probe
Review Section 7.2, Installation for complete instructions. The HC2S3 is
normally installed by mounting it inside a Met20 shield.
4.2 Step 2 — Use SCWin Short Cut to Program Datalogger and
Generate Wiring Diagram
The simplest method for programming the datalogger to measure the HC2S3 is
to use Campbell Scientific's SCWin Short Cut Program Generator.
1. Open Short Cut and click on New Program.
2. Select a datalogger and scan interval.