Product manual

Model HC2S3 Temperature and Relative Humidity Probe

shield (please refer to the 43502 product manual for details). The 41003-5

Radiation Shield has a U-bolt for attaching the shield to a tripod mast/tower leg

or CM200 series crossarm as shown in Figures 3-1 and 3-2.

To install the probe inside the 41003-5 Radiation Shield, the hex plug provided

with the 41003-5 must be replaced with the PN 27731 Hex Plug provided with

the probe. Insert the probe into the radiation shield leaving about 2.5 cm (1”)

exposed below the hex plug, and tighten the hex plug. Route the cable to the

datalogger, and secure the cable to the mounting structure using cable ties.

41003-5

PN 27731 Hex Plug

U-bolt

FIGURE 3-1. HC2S3 and 41003-5 Radiation Shield on a Tripod Mast