Programming instructions

22 Designer’s Guide
Calsense
Stainless Steel Pedestal (model SSE-PED)
The Calsense Stainless Steel Pedestal is a heavy-duty fully-enclosed riser designed for use with the SSE
and SSE-R Stainless Steel Enclosures. This 14-inch high, corrosion- and vandal-resistant pedestal provides
security and protection of field wiring when additional controller elevation is needed.
This is required as part of the StrongBox® SSE-MPS-BASE template kit when specifying a StrongBox
Metered Enclosure in combination with the Calsense SSE Stainless Steel Enclosure.
Stainless Steel Powder Coated Pedestal (model PD-1)
The Calsense Powder-Coated Pedestal Mount is a cost-effective means for controller installation in
secure areas. The Calsense controller box sits directly atop the matching pedestal. The pedestal contains
mounting brackets for an optional Transient Protection Board (model TP-1), making for a clean
installation of valve field wires. The pedestal is mounted to a concrete base, using hardware supplied
with the pedestal.
Stainless Steel Enclosure Breaker (model SSE-BREAKER)
The Calsense Stainless Steel Enclosure Breaker is a 15 amp Square-D single-phase circuit breaker and
housing. It is designed to provide added electrical protection to the controller enclosure components and
satisfy local or state requirements where necessary. It is installed internally onto the back wall of the
Calsense Stainless Steel (model SSe) when specified. Access to the breaker housing is gained through the
front lockable cover plate of the SSE enclosure that opens to reveal a fully-hinged fold-down transient
protection panel.