Programming instructions

Designer’s Guide 21
Calsense
Stainless Steel Backplate (model SSBP)
The Calsense Stainless Steel Backplate is a convenient way to accommodate an indoor wall-mount
installation of ET2000e controllers (Figure 8
). Assembly includes a GFI and receptacle. Knowing the
dimensions of the plate, 22 inch x 32 inch, landscape architects and irrigation designers can allocate the
corresponding wall space and be assured of proper placement of the ET2000e Irrigation Controller and
Transient Protection Box (model TPB) with TP-1 board when specified.
When specified at the same time, the SSBP assembly includes the correct installation of the TP-110
Transient Surge Arrestor.
Figure 8 - Stainless Steel Backplate