Specifications

Appendix A. CR3000 Status Table
A-5
Status Fieldname Description Variable
Type
Default Normal
Range
User can
change?
Info
Type
Baudrate
15
Array of baudrates for comms. Aliased
to: BaudrateRS232, BaudrateME,
BaudrateCOM310, BaudrateSDC7,
BaudrateSDC8, BaudrateCOM1,
BaudrateCOM2, BaudrateCOM3,
BaudrateCOM4
Integer
array of
9
RS232=
-
115200
ME-
SDC8 =
115200
COM1-
4 = 0
1200,
2400,
4800,
9600,
19.2k,
38.4k,
57.6k,
115.2k
Yes, can
also use
SerialOut
instructio
n to setup.
Config
IsRouter Is the CR3000 configured to act as
router
Boolean False 0 or 1 Yes Config
PB
PakBusNodes Number of nodes (approximately) that
will exist in the PakBus network. This
value is used to determine how much
memory to allocate for networking.
Integer 50 >=50 Yes Config
PB
CentralRouters(1) - (8)
16
Array of (8) PakBus addresses for
central routers.
Integer
array of
8
0 _ Yes Config
PB
Beacon (Beacon Interval) Array of Beacon intervals (in seconds)
for comms ports. Aliased to
BeaconRS232, BeaconME,
BeaconCOM310, BeaconSDC7,
BeaconSDC8, BeaconCOM1,
BeaconCOM2, BeaconCOM3,
BeaconCOM4
Integer
array of
9
0 0 - approx.
65,500
Yes Config
PB
Verify Array of verify intervals (in seconds)
for com ports. Aliased to VerifyRS232,
VerifyME, VerifyCOM310,
VerifySDC7, VerifySDC8,
VerifyCOM1, VerifyCOM2,
VerifyCOM3, VerifyCOM4
Integer
array of
9
0 0 – approx.
65,500
_ Status
MaxPacketSize Maximum number of bytes per data
collection packet
_ 1000 _ _
USRDriveSize Used to set up the size of the USR
Drive (a user created drive) on the
CR3000.
Integer 0 8192 +
increments
of 512
bytes
Yes Status
Messages Contains a string of messages that can
be entered by the user.
String _ Yes
CalVolts Calibration table of factory correction
factors for the measurement range
calibration
Float
array of
15
_ _ Calib
CalGain
17
Calibration table of Gain values. Each
integration / range combination has a
gain associated with it. These numbers
are updated by the background slow
sequence if needed in the program.
Float
array of
15
_ . _ Calib