Specifications

Appendix A. CR3000 Status Table
A-4
Status Fieldname Description Variable
Type
Default Normal
Range
User can
change?
Info
Type
LastSlowScan The last time that this slow scan
executed. If the user has slow scans
then this variable becomes an array
with a value for the system slow scan
and each of the users scans.
Integer
array
_ _ _ Status
SlowProcTime
11
The time in microseconds required to
process the current slow scan. If the
user has slow scans then this variable
becomes an array with a value for the
system slow scan and each of the users
scans.
Integer
array
_ _ _ Status
MaxSlowProcTime
12
The maximum time in microseconds
required to process the current slow
scan. If the user has slow scans then
this variable becomes an array with a
value for the system slow scan and
each of the users scans.
Integer
array
_ _ _ Status
PortStatus Array of Boolean values giving the
state of the control ports. The values
are updated every 500mS.
Boolean
array of
8
False True or
False
Yes Status
PortConfig Array of strings explaining the use of
the associated control port. Valid
entries are: Input, Output, SDM, SDI-
12, Tx, and Rx.
String
array of
8
Input Input or
Output
_ Status
Security
13
An array of the (3) Security settings
(will not be shown if security is
enabled).
Integer
array of
3
0, 0, 0 0 - 65535
(0 is no
security)
Yes Status
CommsActive
14
Array of Boolean values telling if
communications is currently active on
the corresponding port. Aliased to
CommActiveRS232, CommActiveME,
CommActiveCOM310,
CommActiveSDC7,
CommActiveSDC8,
CommActiveCOM1,
CommActiveCOM2,
CommActiveCOM3,
CommActiveCOM4
Boolean
array of
9
False,
except
for the
active
COM
True or
False
_ Status
CommsConfig Array of values telling the
configuration of comm ports. Aliased
to CommConfigRS232,
CommConfigME,
CommConfigCOM310,
CommConfigSDC7,
CommConfigSDC8,
CommConfigCOM1,
CommConfigCOM2,
CommConfigCOM3,
CommConfigCOM4
Integer
array of
9
RS232-
SDC8
= 4
COM1-
4 = 0
0 or 4 _ Config