Operator`s manual

SECTION 5. TELECOMMUNICATIONS
5-4
awaiting another command. So the user can
step back and forth between the
Telecommunications Command State and the
Remote Keyboard State.
Keying *0 will compile and run the 21X program
if program changes have been made. To
compile and run the program without leaving the
Remote Keyboard State, use *6 (Section 1.1.4).
The 21X display will show "LOG" when *0 is
executed via telecommunications. It will not
indicate active tables (enter *0 via the keyboard
and the display will show the tables).
2718H
Telecommunications Remote
Command *0 Keyboard
State State