Specifications

Section 2. Quickstart Tutorial
2-16
2.2.2.3 Synchronizing the Clocks
Click the Set Clock button to synchronize the datalogger’s clock with the
computer’s clock.
2.2.2.4 Sending the Program
Click the Send Program button. Navigate to the C:\CampbellSci\SCWin
folder and select the file QED.CR1 and click the Open button. A progress bar
is displayed, followed by a message that the program was successfully sent.
2.2.2.5 Monitoring Data Tables
The Monitor Data window (FIGURE 2.2-9) is used to display the current
sensor measurement values from the Public Table, and the most recent data
from the OneMin table. After sending a program to the CR1000, a good
practice is to monitor the measurements to ensure they are reasonable.
Click on the Monitor Data tab. The Public table is automatically selected and
displayed. To view the OneMin table, click the Add button, select a cell in
which to place the first value, select the OneMin table, and click the Paste
button.
FIGURE 2.2-9. PC200W Monitor Values Tab
2.2.2.6 Collecting Data
Click on the Collect Data tab (FIGURE 2.2-10). From the Collect Data
window, choose what data to collect, and where to store the collected data.
Click on the OneMin table, with the option New data from datalogger
selected. Click the Collect button and a dialog box appears, prompting for a
file name. Click the Save button to use the default file name
CR1000_OneMin.dat. A progress bar, followed by the message Collection
Complete is displayed.