Specifications

Index to Sections
Index-6
Numerical Formats, 9-3
Offset, 4-7, 9-21, 9-22
Ohm, A-5
Ohms Law, A-5
OID, 4-4
OMNISAT, 10-41
OmniSatData, 10-41
OmniSatRandomSetup, 10-41
OmniSatStatus, 10-41
OmniSatSTSetup, 10-41
On-line Data Transfer, A-5
Opcodes, B-1
Open Input Detect, 4-4
Open Inputs, 4-5
OpenInterval, 10-3
Operating System, 8-2, 8-3
Operating Temperature Range, 18-1
Operators, 10-16, 10-18
OR, 10-18
OR Diode Circuit, 6-2
OS, 8-2, 8-3
OS Date, B-1
OS Signature, B-1
OS Version, B-1
Output, A-5
Output Array, A-5
Output Interval, A-5, B-1
Output Processing, 9-15, 10-4
Output Processing Instructions, A-6
Output Trigger, 11-34
OutputOpt, 11-27
Overrun, 19-1, B-1
Overview, 3-1
Overview - Modbus, 15-2
Overview – Power Supply, 19-6
Packet Size, B-1
PakBus, 3-8, 10-30, 10-31, 14-1, 14-2, 14-5, 15-7
PakBus Address, B-1
PakBus Network, 14-2
PakBus Nodes, B-1
PakBus Router, B-1
PakBusClock, 10-27, 10-32
Panel Temperature, 4-22, 4-23, 4-24, 4-27, 4-29,
B-1
PanelTemp, 10-10
Parameter, A-6
Password, 3-10
PC Programs, 19-5
PC Support Software, 3-11
PC200W, 2-10, 2-15, 16-1
PC400, 16-1
PCM, 4-4
PDA Support, 16-3
PeakValley, 10-5
Peer-to-peer, 10-31
Period Average, 2-7, 3-2, 4-33, 10-12, A-6
PeriodAvg, 10-12
Peripheral, A-6
Peripheral Port, 3-5
Peripherals, 5-1
Piezometer, 2-1, 3-2
Ping, 11-19, 14-5, A-6
Pipeline Mode, 4-2, 9-18, 9-19
PipelineMode, 10-2
Poisson Ratio, A-7
Polarity, 2-9
Polarity Reversal, 4-6, 4-8
Polynomial - Thermocouple, 4-27
Port Configuration, B-1
Port Settings, 8-8
Port Status, B-1
PortGet, 10-12
Ports, 2-7, 17-11
PortsConfig, 10-12
PortSet, 10-12
Power, 2-9, 3-4, 4-2, 5-2, 6-2
Power Budget, 6-1, 11-26
Power Consumption, 6-1
Power Requirement, 6-1
Power Supply, 2-2, 3-6, 6-1, 11-26, 19-6, 19-7
Power Switching, 5-3
Power-up, 12-9
PPP, 10-37, 11-14
ppp Dial Response, B-1
ppp Dial String, B-1
ppp Interface, B-1
ppp IP Address, B-1
ppp Password, B-1
ppp Username, B-1
PPPClose, 10-37
PPPOpen, 10-37
Precision, 2-1, A-6, A-10
PreserveVariables, 10-2
Pressure Transducer, 4-13
Primer, 2-1
Print Device, A-6
Print Peripheral, A-6
Priority, 9-18
Probes, 2-1, 3-2
Process Time, B-1
Processing, 10-16
Processing Instructions, A-6
Program, 3-6
Program - Arrays, 9-6
Program – Compile Error, 19-2
Program - Constants, 9-10
Program – Data Storage Processing Instructions,
9-20
Program - Data Tables, 9-11
Program - Data Types, 9-7
Program - DataInterval() Instruction, 9-14
Program - DataTable() Instruction, 9-14