Specifications

Appendix B. Status Table
B-7
Status Fieldname Description Variable
Type
Default Normal
Range
User can
change?
Info
Type
Beacon Array of Beacon intervals (in seconds)
for comms ports. Aliased to BeaconRS-
232,
BeaconME,
BeaconSDC7,
BeaconSDC8,
BeaconSDC10,
BeaconSDC11,
BeaconCOM1,
BeaconCOM2,
BeaconCOM3,
BeaconCOM4
Integer
array of
9
0 0 - approx.
65,500
Yes Config
PB
Verify Array of verify intervals (in seconds)
for com ports. Aliased to
VerifyRS-232,
VerifyME,
VerifySDC7,
VerifySDC8,
VerifySDC10,
VerifySDC11,
VerifyCOM1,
VerifyCOM2,
VerifyCOM3,
VerifyCOM4
Integer
array of
9
0 0 - approx.
65,500
_ Status
MaxPacketSize Maximum number of bytes per data
collection packet.
_ 1000 _ _
USRDriveSize Configures the USR: drive. If 0, the
drive is removed. If non-zero, the drive
is created.
Integer 0 8192 Min Yes Mem
IPInfo Indicates current parameters for IP
connection.
String
pppInterface Controls which datalogger port PPP
service will be configured to use.
Warning: If this value is set to CS I/O
ME, do not attach any other devices to
the CS I/O port.
Integer 0
(Inactiv
e)
pppIPAddr
Specifies the IP address that will be
used for the PPP interface if that
interface is active (the PPP Interface
setting needs to be set to something
other than Inactive).
String 0.0.0.0
pppUsername Specifies the user name that will be
used to log in to the PPP server.
String _
pppPassword Specifies the password that will be used
to log in to the PPP server.
String _