Specifications

Appendix B. Status Table
B-5
Status Fieldname Description Variable
Type
Default Normal
Range
User can
change?
Info
Type
BuffDepth Shows the current Pipeline Mode
processing buffer depth., which
indicates how far processing is
currently behind measurement.
MaxBuffDepth Gives the maximum number of buffers
processing lagged measurement.
LastSystemScan
8
The last time the background
calibration executed.
Integer
array
_ _ _ Status
LastSlowScan
9
The last time SlowSequence scan(s)
executed.
Integer
array
_ _ _ Status
SystemProcTime
8,12
The time (μs) required to process the
background calibration.
Integer
array
_ _ _ Status
SlowProcTime
9,12
The time (μs) required to process
SlowSequence scan(s).
Integer
array
_ _ _ Status
MaxSystemProcTime
8,13
The maximum time (μs) required to
process the background calibration.
Integer
array
_ _ _ Status
MaxSlowProcTime
9,13
The maximum time (μs) required to
process SlowSequence scan(s).
Integer
array
_ _ _ Status
PortStatus Array of Boolean values posting the
state of control ports. Values updated
every 500 ms.
Boolean
array of
8
False True or
False
Yes Status
PortConfig Array of strings explaining the use of
the associated control port. Valid
entries are: Input, Output, SDM, SDI-
12, Tx, and Rx.
String
array of
8
Input Input or
Output
_ Status
SW12Volts Status of switched 12 V control port. Boolean False True or
False
Yes Status
Security
14
Array of the three security settings or
codes. Will not be shown if security is
enabled.
Integer
array of
3
0, 0, 0 0 - 65535
(0 is no
security)
Yes Status
RS-232Power
(RS-232 Always On)
Controls whether the RS-232 port will
remain active even when
communication is not taking place. If
RS-232 handshaking is enabled
(handshaking buffer size is non-zero),
this setting must be set to yes
Boolean 0 0 or 1
RS-232Handshaking
(RS-232 Hardware
Handshaking Buffer Size)
If non zero, hardware handshaking is
active on the RS-232 port. This setting
specifies the maximum packet size sent
between checking for CTS.
Integer 0
RS-232Timeout
(RS-232 Hardware
Handshaking Timeout)
For RS-232 hardware handshaking, this
specifies in tens of msecs the timeout
that the datalogger will wait between
packets if CTS is not asserted.
Integer 0