Specifications

Section 10. CRBASIC Programming Instructions
10-14
10.5.9 Specific Sensors
CS110
Measures electric field by means of a CS110 electric field meter.
Syntax
CS110 (Dest, Leakage, Status, Integ, Mult, Offset)
CS110Shutter
Controls the shutter of a CS110 electric field meter.
Syntax
CS110Shutter (Status, Move)
CS616
Enables and measures a CS616 water content reflectometer.
Syntax
CS616 (Dest, Reps, SEChan, Port, MeasPerPort, Mult, Offset)
TGA
Measures a TGA100A trace gas analyzer system.
Syntax
TGA (Dest, SDMAddress, DataList, ScanMode)
HydraProbe
Reads the Stevens Vitel SDI-12 Hydra Probe sensor.
Syntax
HydraProbe (Dest, SourceVolts, ProbeType, SoilType)
Therm107
Measures a Campbell Scientific 107 thermistor.
Syntax
Therm107 (Dest, Reps, SEChan, Vx/ExChan, SettlingTime, Integ,
Mult, Offset)
Therm108
Measures a Campbell Scientific 108 thermistor.
Syntax
Therm108 (Dest, Reps, SEChan, Vx/ExChan, SettlingTime, Integ,
Mult, Offset)
Therm109
Measures a Campbell Scientific 109 thermistor.
Syntax
Therm109 (Dest, Reps, SEChan, Vx/ExChan, SettlingTime, Integ,
Mult, Offset)
CS7500
Communicates with the CS7500 open path CO2 and H2O sensor.
Syntax
CS7500 (Dest, Reps, SDMAddress, CS7500Cmd)
CSAT3
Communicates with the CSAT3 three-dimensional sonic anemometer.
Syntax
CSAT3 (Dest, Reps, SDMAddress, CSAT3Cmd, CSAT3Opt)