Specifications

Section 8. CR1000 Configuration
8-10
8.3.2 Logger Control Tab
FIGURE 8.3-6. DevConfig Logger Control Tab
The clock in the PC and the datalogger will be checked every second and the
difference displayed. The System Clock Setting allows entering what offset,
if any, to use with respect to standard time (Local Daylight Time or UTC,
Greenwich mean time). The value selected for this control will be remembered
between sessions. Clicking the Set Clock button will synchronize the station
clock to the current computer system time.
Current Program displays the current program known to be running in the
datalogger. This value will be empty if there is no current program.
The Last Compiled field displays the time when the currently running
program was last compiled by the datalogger. As with the Current Program
field, this value will be read from the datalogger if it is available.
Last Compile Results shows the compile results string as reported by the
datalogger.
The Send Program button presents an open file dialog from which to select a
program file to be sent to the datalogger. The field above the button will be
updated as the send operation progresses. When the program has been sent the
Current Program, Last Compiled, and Last Compile Results fields will be filled
in.