Specifications

Section 8. CR1000 Configuration
8-7
8.3.1 Deployment Tab
FIGURE 8.3-3. DevConfig Deployment Tab
As shown in FIGURE 8.3-3, the Deplo
yment tab allows the user to configure
the datalogger prior to deploying it. Deployment tab settings can also be
accessed through the Setting Editor tab and the Status table.
8.3.1.1 Datalogger Sub-Tab
Serial Number displays the CR1000 serial number. This setting is set at the
factory and cannot be edited.
OS Version displays the operating system version that is in the CR1000. The
default station name is the CR1000 serial number.
Station Name displays the name that is set for this station.
PakBus Address allows users to set the PakBus address of the datalogger.
The allowable range is between 1 and 4094. Each PakBus device should have
a unique PakBus address. Addresses >3999 force other PakBus devices to
respond regardless of their respective PakBus settings. See the PakBus
Networking Guide for more information.
Security – See Section 3.1.7