Instruction manual

CS650 and CS655 Water Content Reflectometers

4. Select Datalogger Model and Scan Interval (default of 5 seconds is OK

for most applications). Click Next.

5. Under the Available Sensors and Devices list, select the Sensors |

Meterological | Soil Moisture | CS650/CS655 Water Content

Reflectometer. Four options are available that monitor different

parameters. In this tutorial, we’ll select CS650/CS655 Water Content

Reflectometer (VWC, EC, T, P, PA, and VR). Click to move the

selection to the Selected device window. The soil temperature defaults to

degree C, and the sensor is measured hourly. These can be changed by

clicking the Temperature or Measure sensor box and selecting one of

the other options.