Instruction manual

CS650 and CS655 Water Content Reflectometers
4. Quickstart
Short Cut is an easy way to program your datalogger to measure the CS650 and
assign datalogger wiring terminals. The following procedures shows using
Short Cut to program the CS650.
1. Install Short Cut by clicking on the install file icon. Get the install file
from either www.campbellsci.com, the ResourceDVD, or find it in
installations of LoggerNet, PC200W, PC400, or RTDAQ software.
2. The Short Cut installation should place a shortcut icon on the desktop of
your computer. To open Short Cut, click on this icon.
3. When Short Cut opens, select New Program.
2